| Customization: | Available |
|---|---|
| Charge Method: | Quick Charge |
| Installation: | Mobile Charging Station |
|
Still deciding? Get samples of US$ 22000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Brand |
Szenbar |
|
sizes |
75.2*68.5*74.3 mm |
|
AC Input Voltage |
200V-250VDC |
|
Output Voltage Adjustment Range |
200V-750VDC |
| Output Current Adjustment Range | 0-50A |
|
Input undervoltage protection point |
200VDC |
|
Input overvoltage protection point |
750VDC |
| overtemperature alarm | 50-60°C |
|
Charge Gun Cable Length |
5 meters |
|
weights |
Around 207kG |
Operating instructions
Switching Procedures
A. Discharge mode
l Turn on the key switch, at this time the device starts to self-test and the touch display lights up.
l 5-10 seconds system startup is complete, storage and charging system equipment are into standby page.
l Then connect the DC charging gun with the electric car, the car gun connection status charging indicator light is always on.
l Click 'Start Charging', the charging gun electronic lock locks, the cooling fan begins to run, and then enter the charging state.
B. Energy storage battery replenishment mode
l The storage and charging system needs to be on!
l Plug the external AC cable into the AC recharge (AC CH) port, start the external power supply first, then turn on the AC switch for charging;
l Click on the blank upper left corner of the display, when the battery status on the battery page shows Charging, that is, after successful charging.
Shutdown procedure
l The touch screen indicates the end of charging (or manually click to stop charging).
l The electronic lock automatically unlocks and unplugs the DC charging gun.
l Turn off the Key switch.
Touch display interface
Routine maintenance
1. Operating ambient temperature range: 0ºC~55ºC;
2. Avoid wet, potentially waterlogged locations;
3. The energy storage and charging system is stored, and if it has not been used for six months, the storage battery needs to be replenished with electricity once;
4. Before use, you need to check whether there is any damage to the output and input ports of the energy storage and charging system, and only use it after everything is normal;
Maintenance of the energy storage charging system
1. Keep the exterior of the energy storage charging system and the working environment in a clean and dry condition.
2. It is prohibited to use organic solvents such as banana water, gasoline, alcohol, etc. to scrub the energy storage charging system.
3. The use of the energy storage charging system should try to keep the ambient temperature between 0ºC and 55ºC.
4. If the energy storage charging system is not used for a long period of time, it is recommended that the storage battery be charged and discharged one cycle every three months.
){kind=link}